非接触式吸盘 XT661
-
・实现工件的非接触搬运。
・可吸附工件的距离为:10mm
・有2种形式可选
旋风型:高提升力:最大44N
伯努利型:夹持时的工件振幅:±0.01mm以下
产品特点
■Max workpiece suction distance:10 mm
Original groove-channel design allows cyclone effect with
large suction area and even pr♋essure dispersion!
・High lifting force: Max. 44 N (Outer body diameter: ø100)
・Totaled 5 size: ø20/ø40/ø60/ø80/ø100
・Grease-free
・Can be disassembled and cleaned the inside.
With urethane pad* (-X207)
* Except ø20
・Mitigation of impacts and prevention of damage during lifting
・No need to install a guide
With multi-port (-X211)
The presence of a workpiece can be
checked by installing a sensor.
・Can be mounted on the end of the robot arm.
・Two sizes (ø20 and ø25) are available.
Original groove-channel design allows the Bernoulli effect with suppressing the amplitude of the workpiece during gripping!
🏅
Amplitude of the workpiece during🌳 gripping: ±0.01 mm*or less
* Solar battery silicon cell(□125 mm, t = 250 μm)
* In SMC conditions
・Reduction of rotation load * No directionality of whirlwind air
・Standardization of multi-port* * Except ø40
・Grease-free
・Can be disassembled and cleaned the inside.