产品信息 »
产品目录
» 口碑最好的彩票平台.十大正规彩票安全平台:产业用通信元件/无线系统
» 产业用通信元件 对应CC-Link的元件
文化产业用通信网络pcb板 相匹配CC-Link的pcb板
步进电机控制器 JXCE□/9□/P□/D1/L□/M1
-
・对应EtherCAT、EtherNet/IP™、PROFINET、DeviceNet®、
IO-Link、CC-Link
・对应2种动作指令方法
步序号指令运转、数值指令运转
・通信电缆可连续配线
・对应数值监测
・可IO-Link通信
・追加STO安全功能对应品/JXC□F
系列 | 对应电机 | 电源电压 | 现场总线 |
---|---|---|---|
JXCE1(标准规格) JXCEF(对应安全规格) | 步进电机 (带编码器 DC24V) | DC24V ±10% | EtherCAT™ |
JXC91(标准规格) JXC9F(对应安全规格) | 步进电机 (带编码器 DC24V) | DC24V ±10% | EtherNet/IP™ |
JXCP1(标准规格) JXCPF(对应安全规格) | 步进电机 (带编码器 DC24V) | DC24V ±10% | PROFINET |
JXCD1(标准规格) | 步进电机 (带编码器 DC24V) | DC24V ±10% | DeviceNet™ |
JXCL1(标准规格) JXCLF(对应安全规格) | 步进电机 (带编码器 DC24V) | DC24V ±10% | IO-Link |
JXCM1(标准规格) | 步进电机 (带编码器 DC24V) | DC24V ±10% | CC-Link |
产品特点
■Two types of operation command
Step no. defined operation: Operate using the preset step data in the controller.
Numerical data defined operation: The actuator 🌸operates using values such as position and speed from the PLC.
■Numerical monitoring available
Numerical information, such as the current speed, current position, and alarm codes, can be monitored on the PLC.
■Transition wiring of communication cables
Two communication ports are provided.
* For the DeviceNet™ type, transition wiring is possible using a branch connector.
* 1 to 1 in the case of IO-Link
■IO-Link communication can be performed.
The data storage function eliminates the need for troublesome resetting of step data and parameters when changing over the controller.
●Step data and parameters can be set from the master side.
Step data and parameters can be set or changed by means of IO-Link communication.
●Data storage function
When the controller is changed, the parameters and step data for the actuator are automatically set.*1
●4-wire unshielded cables can be used. *1 The “basic parameter” and the “return to origin parameter” are automatically set as the actuator parameters, and the 3 items of data consisting of No. 0 to 2 are automatically set as the step data.