如果需要添加关键字库,直接把文本复制到当前目录即可,注意编码格式一定要是utf-8,不然会乱码SMC- Bar Type/Ionizer Series IZS31

口ꦺ碑最好的彩票平台.十大正规彩票安全平台:Static Neutralization Equipment » Bar Type/Ionizer Series IZS31 - Specifications/Dimensions

Bar Type/Ionizer Series IZS31-Product Features

口碑最好的彩票平台.十大正规彩票安全平台:IZS40/41/42 Series | 口碑最好的彩票平台.十大正规彩票安全平台:IZS31 Series

|Specifications

Ionizer model		IZS31-□□(NPN specification)	IZS31-□□P(PNP specification)
Ion generation method		Corona discharge type
Method of applying voltage		Sensing DC, Pulse DC, DC
Electricity discharge output		±7000V
Ion balance ^{Note 1)}		±30 V (Stainless steel electrode needle: ±100 V)
Air purge	Fluid	Air (Clean and dry)
	Operating pressure	0.7 MPa or less ^{Note 2)}
	Connecting tubing O.D.	φ4
Power supply voltage		DC24V±10%
Current consumption	Sensing DC mode	200 mA or less (While standing by: 120 mA or less)
	Pulse DC mode	Autobalance sensor [Body-mounting type] : 300 mA or less Autobalance sensor [High-precision type] : 200 mA or less When sensor is not used : 170 mA or less
	DC mode	170 mA or less
Input signal	Discharge stop signal	Connected to GND (Voltage: 5 VDC or less, Current consumption: 5 mA or less)	Connected to +24 V (Voltage: Between 19 VDC and power supply voltage, Current consumption: 5 mA or less)
Input signal	Maintenance signal
Output signal	Static electricity removal completion signal	Max. load current: 100 mA Residual voltage: 1 V or less (Load current at 100 mA) Max. applied voltage: 28 VDC	Max. load current: 100 mA Residual voltage: 1 V or less (Load current at 100 mA)
	Maintenance output signal
	Error signal
	Sensor monitor output ^{Note 3)}	Voltage output 1 to 5 V (Connect a 10 kΩ or larger load.)
Effective distance of static electricity elimination		50 to 2000 mm (Sensing DC mode: 200 to 2000 mm)
Ambient temperature, Fluid temperature		0 to 50℃
Ambient humidity		35 to 80% Rh (No condensation)
Material		Cover of ionizer: ABS, Electrode needle: Tungsten, Single crystal silicon, Stainless steel
Vibration resistance		Durability 50 Hz Amplitude 1 mm XYZ each 2 hours
Shock resistance		10G
Compliance with overseas standards/directive		CE (EMC directive: 2004/108/EC) UL U.S. Standard for Electrostatic Air Cleaner, UL867, fourth edition CSA Canadian Standard for Electrostatic Air Cleaner, CAN/CSA C22.2 No.187-M1986

Note 1) When the air purge is performed between a charged object and an ionizer at a distance of 300 mm
Note 2) When the electrode cartridge with low maintenance is used, the operating pressure must be 0.05 MPa or more.
Note 3) When the potential of a charged object is measured by a feedback sensor, the relationship between the potential being measured and the sensor monitor output voltage, and the detection range of the sensor vary depending on the sensor’s installation distance. Refer to "口碑最好的彩票平台.十大正规彩票安全平台:Technical Data".

Number of Electrode Cartridges/Weight

Bar length (mm)	300	380	620	780	1100	1260	1500	1900	2300
Number of electrode cartridges	3	4	7	9	13	15	18	23	28
Weight (g)	470	530	720	850	1100	1220	1410	1730	2040

Sensor

Sensor model	IZS31-DF (Feedback sensor)	IZS31-DG (Autobalance sensor [High-precision type])	IZS31-DE (Autobalance sensor [Body-mounting type])
Ambient temperature	0 to 50℃
Ambient humidity	35 to 85% Rh (No condensation)
Case material	ABS	ABS, Stainless steel	ABS
Vibration resistance	Durability 50 Hz Amplitude 1 mm XYZ each 2 hours
Shock resistance	10G
Weight	200 g (Including cable weight)	220 g (Including cable weight)	110 g (Including cable weight)
Installation distance	10 to 50 mm (Recommended)	－
Compliance with overseas standards/directive	CE (EMC directive: 2004/108/EC, Low voltage directive: 73/23/EEC, 93/68/EEC)

|Dimensions

Ionizer/IZS31-□□□□-□□

口碑最好的彩票平台.十大正规彩票安全平台:▲Page top