如果需要添加关键字库,直接把文本复制到当前目录即可,注意编码格式一定要是utf-8,不然会乱码SMC- Electrostatic Sensor Series IZD10/IZE11

口碑最好的彩票平台.十大正规෴彩票安全平台:Static Neutralization Equipment » Electrostatic Sensor Series IZD10/IZE11 - Specifications/Dimensions

|Electrostatic Sensor ／ Series IZD10

Specifications

Model	IZD10-110	IZD10-510
Potential measurement	±0.4 kV (at detection distance: 25 mm) ^Note)	±20 kV (at detection distance: 50 mm) ^Note)
Output voltage	1 to 5 V (Output impedance: Approx. 100 Ω)
Effective detection distance	10 to 50 mm	25 to 75 mm
Linearity	±5% F.S. (0 to 50°C, at detection distance: 25 mm)	±5% F.S. (0 to 50°C, at detection distance: 50 mm)
Output delay time	100 ms or less
Power supply voltage	24 VDC ±10%
Current consumption	40 mA or less
Operating ambient temperature	0 to 50℃
Operating ambient humidity	35 to 85% Rh (with no condensation)
Material	Head case : ABS Amplifier case : ABS
Vibration resistance	Durability 50 Hz Amplitude 1 mm X, Y, Z each 2 hours
Shock resistance	100m/s²
Weight	185 g (including cable weight)
Compliance with EN standards	Protective class : Class III (EN60950-1) Pollution Degree 3 CE marking : Low voltage directive : 2006/95/EC Only when connected to a SELV-type external circuit.
EMC directive	2004/108/EC
UL standards	UL508

Note) The relationship between the measured potential and the output voltage varies depending on the detection distance. For details on the relationship in the detection distance between the measured potential and the output voltage, refer to the graph in "口碑最好的彩票平台.十大正规彩票安全平台:Technical Data - Output Signal".

Dimensions

|Electrostatic Sensor Monitor ／ Series IZE11

Specifications

Model			IZE11□
Connection sensor			IZD10-110	IZD10-510
Rated measurement range			-0.4 kV to +0.4 kV ^{Note 1)}	-20 kV to +20 kV ^{Note 2)}
Min. unit setting			0.001kV	0.1kV
Measurement distance setting			10 to 50 mm	25 to 75 mm
Power supply voltage			24 VDC ±10% or less (with power supply polarity protection)
Current consumption			50 mA or less (excluding sensor unit’s current consumption)
Sensor input			1 to 5 VDC (Input impedance: 1 MΩ)
	Number of inputs		1 input
	Input protection		With excess voltage protection (up to 26.4 V)
	Hysteresis		Hysteresis mode: Variable Window comparator mode: Variable
Switch output			NPN or PNP open collector: 2 outputs
	Max. load current		80mA
	Max. applied voltage		30 VDC (with NPN output)
	Residual voltage		1 V or less (with load current of 80 mA)
	Short circuit protection		With short circuit protection
	Response time (including sensor response time)		100 ms or less Response time with anti-chattering function: 500 ms, 1 s, 2 s or less
Analog output	Voltage output		Output voltage: 1 to 5 V (with rated pressure range), Output impedance: Approx. 1 kΩ
		Accuracy (for readings) (25°C)	±1％F.S.
	Current output		Output current: 4 to 20 mA (with rated pressure range) Max. load impedance: 600 Ω (at 24 VDC), Min. load impedance: 50 Ω
		Accuracy (for readings) (25°C)	±1％F.S.
	Response time (including sensor response time)		200 ms (without filter), 1.5 s (with filter) or less
Display acurracy			±0.5％F.S.±1digit
Display			3 + 1/2 digit, 7-segment indicator, 2-color display (Red/Green) Sampling cycle: 5 times/s
Indicator light			OUT1: Lights up when output is turned ON (Green), OUT2: Lights up when output is turned ON (Red).
Environment	Enclosure		IP40
	Operating temperature range		Operating: 0 to 50°C, Stored: –10 to 60°C (with no freezing or condensation)
	Operating humidity range		Operating/Stored: 35 to 85% RH (with no condensation)
	Withstand voltage		1000 VAC for 1 minute between terminals and housing
	Insulation resistance		50 MΩ or more (500 VDC measured via megohmmeter) between terminals and housing
	Vibration resistance		10 to 150 Hz at whichever is smaller of 1.5 mm amplitude or 98 m/s2 acceleration, in X, Y, Z direction for 2 hrs. each (De-energized)
	Impact resistance		100 m/s2 in X, Y, Z directions 3 times each (De-energized)
Temperature characteristics			±0.5% F.S. (25°C reference)
Connection method			Power supply, Output connection: 5-pin connector, Sensor connection: 4-pin connector
Material			Front case: PBT, Rear case: PBT
Weight	(excluding power supply/output connection cable)		30g
Standards			CE marking, UL (CSA) compliant

Note 1) Rated value when the distance between the charged object and the sensor is 25 mm
Note 2) Rated value when the distance between the charged💯 object and the sensor is 50 mm

Dimensions

口碑最好的彩票平台.十大正规彩票安全平台:▲Page top