- Product Features
- 口碑最好的彩票平台.十大正规彩票安全平台:Select from Motor/C💜ont𒐪rol Methods
- 口碑最好的彩票平台.十大正规彩票安全平台:Product List
|Step Data Input Type Series JXC51・61/LECA6
Simple Setting to Use Straight Away
Select normal mode when detailed setting is required.
- Step data can be set in detail.
- Signals and terminal status can be monitored.
- Parameters can be set.
- JOG and constant rate movement, return to origin, test operation and testing of forced output can be performed.
|Step Motor Controller JXC□ Series
Step no. defined operation: Operate using the preset step data in the controller.
Numerical data defined operatio🌠n: The actuator operates using values such as position and speed from the PLC.
𓂃
* For the DeviceNet™ type, transition wiring is possible using a branch connector.
* 1 to 1 in the case of IO-Link
When the controller is changed, the parameters and step data for the actuator are automatically set.*1
●4-wire unshielded cables can be used. *1 The “basic parameter” and the “return to origin parameter” are automatically set as the actuator parameters, and the 3 items of data consisting of No. 0 to 2 are automatically set as the step data.|Programless Type Series LECP1
No programming
Capable of setting up an electric actuator operation without using a PC or teaching box. No programming.|Programless Controller (With stroke study) Series LECP2
Stroke end operation similar to an air cylinder is possible.
(using the [1] stroke study and [2] reduced wiring below)|Step Motor Driver (Pulse Input Type) Series LECPA
A driver that uses pulse signals to allow positioning at any position.
The actuator can be controlled from the customers’ positioning unit.Return-to-origin command signal
Enables automatic return-to-origin action.With force limit function (Pushing force/Gripping force operation available)
Pushing force/Positioning operation possible by switching signals.
|AC Servo Motor Controller Series LECS
- Compatible motor capacity: 100 W, 200 W, 400 W
- Compatible encoder: Incremental type/Absolute type
- Servo adjustment using auto gain tuning
- With display setting function
|MECHATROLINK Compatible AC Servo Motor Driver Series LECYM/LECYU
■MECHATROLINK- Ⅱ Type Series LECYM
Applicable Fieldbus protocol:
Number of connectable drivers: 30 units
(Transmission distance: Max. 50 m in total)
■MECHATROLINK- Ⅲ Type Series LECYU
Applicable Fieldbus protocol:
Number of connectable drivers: 62 units
(Transmission distance: Max.𓃲 75 m between stations)