SMC- New Products Category

Pin Cylinder: Single Acting, Spring Return
ø4, ø6, ø10, ø16
CJP Series Updated Aug-21

A short-stroke miniature cylinder with a shorter overall length
Rod end cap can now be ordered with the cylinder.
One-touch fitting can be connected. (Panel mount type)
Applicable for the change of the rod end shape (-XA□) (Simple specials)
16 mm bore size is now available. (Existing product: 15 mm)

See Catalog

Air Cylinder
ø20, ø25, ø32, ø40
CM2 Series Updated Aug-21

Cylinder with rod end bracket is standardized.
Interchangeable in mounting with the existing model
Various mounting bracket options
Mounting brackets suitable for various installation conditions
Improved mounting flexibility
Part numbers for products with a rod end bracket and/or a pivot bracket available
It is not necessary to order a bracket for the applicable cylinder separately.
Easy fine adjustment of auto switch position
Overall length is shortened with boss-cut type.
With auto switch (CDM2-Z1)

口碑最好的彩票平台.十大正规彩票安全平台:See Catalog

Air Cylinder
ø20, ø25, ø32, ø40
JCM Series Updated Jun-21

A foot type and a flange type have been added. [New]
Overall length shortened by up to 97 mm
Weight: Max. 54% lighter (0.69 kg→0.32 kg)
Various cover types available
Port size: M5, Rc1/8, and NPT1/8 available
Male and female rod ends available
With auto switch (JCDM series: JCDM)

See Catalogs

Compact Cylinder
ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100
JCQ Series Updated Jun-21

An axial foot type and a flange type have been added. (ø32 to ø100)[New]
Compact: Overall length shortened by 6.5 mm, Width shortened by 6 mm, Height shortened by 4 mm
Weight: Max. 46% lighter (382 g → 204 g)
Volume: Max. 40% reduction
With auto switch (JCDQ Series: JCDQ)

口碑最好的彩票平台.十大正规彩票安全平台:See Catalogs

Air Cylinder
ø45, ø56, ø67, ø85
JMB Series Updated Jun-21

A foot type and a flange type have been added. [New]
Intermediary bore sizes: ø45, ø56, ø67, ø85
Air saving, Space saving
Overall length shortened by 27 mm
Weight reduced by up to 36% (1.56 kg → 1.00 kg)
Air saving: Reduced by up to 29%
Air consumption can be reduced by optimal size selection.

口碑最好的彩票平台.十大正规彩票安全平台:See Catalog

Actuator Position Sensor
D-MP□ Series Updated May-21

Now with a greater number of models! [New]
CQS Series Compact Cylinder
MXH Series Compact Slide
MXS and MXQm Series Air Slide Tables
MHZ, MHZL2, MHL2, and MHF2 Series Parallel Type Air Grippers

See Catalogs

Arc Welding Spatter-resistant Lead Wire Type
Magnetic Field-resistant Solid State Auto Switch
D-P3DWA□-1173□ Updated May-21

Improved lead wire spatter resistance
Special fluorine compounds are used for the sheath, insulation, and insulator.
A shield is provided between the sheath and the insulation to prevent spatter from entering the insulation.
A type with a spatter cover is available.
The metal cover (Material: Stainless steel) covers the body to prevent spatter adhesion.

口碑最好的彩票平台.十大正规彩票安全平台:See Catalog

Cylinder with Lock: With Lock Status Indication
ø32, ø40, ø50, ø63, ø80, ø100
C96N-X3030□ Updated Mar-21

Safety measure: Whether the cylinder is in a locked or manual lock released state can be visually confirmed at a glance.
Highly visible lock released state indication label (Yellow)
Available with a cap nut

口碑最好的彩票平台.十大正规彩票安全平台:See catalog

ISO Cylinder/Air Cylinder
Non-adjustable Air Cushion Type
C85-X3242/C75-X3242 Updated Mar-21

Smooth stopping with less impact compared to the type that only has a rubber bumper
Reduced impact noise
No need to adjust the cushion needle
Shorter cycle time
The air cushion + rubber bumper construction enables the cycle time to be shortened, compared to the type that only has an air cushion.

口碑最好的彩票平台.十大正规彩票安全平台:See Catalog

End Power Cylinder
ø40, ø50
CDQ2A-X3260 Updated Feb-21

Air consumption: Max. 73% reduction
Output is generated from 5 mm in front of the stroke end. (Extending operation only)
Energy saving can be achieved by using the assist cylinder to reach the output stroke position.
Smooth operation even when output is generated
The CQ2 series rod flange type is mountable.
Optimal for applications such as press fitting and clamping that require force at the stroke end
Controllable by a single solenoid valve in the same way as a conventional cylinder

口碑最好的彩票平台.十大正规彩票安全平台:See Catalog

Air Cylinder
ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100
CG1 Series Updated Jan-21

Improved piping flexibility
Cylinder with rod end bracket is standardized.
Interchangeable in mounting with the existing model
Various mounting bracket options
Part numbers for products with a rod end bracket and/or a pivot bracket
It is not necessary to order a bracket for the applicable cylinder separately.

See Catalog

Pin Clamp Cylinder
High-Hardness Type Guide Pin
C(L)KQ□D-X3256 Updated Nov-20

30% increase in guide pin material hardness
A high-hardness guide pin ideal for dealing with high-strength material workpieces
The specifications, mounting, and external dimensions are interchangeable with the existing model (C(L)KQ□50).
Interchangeable with guide pins of the existing model

口碑最好的彩票平台.十大正规彩票安全平台:See Catalog

Heavy Duty Stopper Cylinder/
Lock Release Specification
RS2H-XC102 Updated May-20

Prevents lever damage when a transferred workpiece moves backward
Prevents damage by releasing the locked lever when a pallet suddenly moves backward and collides with the lever

口碑最好的彩票平台.十大正规彩票安全平台:See Catalog

With Stable Lubrication Function (Lube-retainer)
Dual Rod Cylinder/Compact Type
CXSJ Series Updated Dec-19

Applicable to operation in micro-powder (10 to 100 μm) / general environments
4 times the durability of the standard model in micro-powder environments
As Lube-retainers are mounted in two locations, grease film is formed on the piston rod surface, improving durability
This construction allows for the prevention of the entry of dust and foreign matter.
The number of operating cycles can be improved even in general environments.

See catalog

Cylinder with Lock
With Lock Status Indication
MWB-X3030□ Updated Oct-19

Safety Measure: Whether the cylinder is in a locked or manual lock
released state can be visually confirmed at a glance
The high visibility of the lock released state indication label (yellow)
allows for easy confirmation of the lock released state, even from a distance.
Available with a cap nut
Prevents the adhesion of spatter, foreign matter, etc.

See Catalog

Cylinder with Lock
ø32, ø40, ø50, ø63, ø80, ø100
CP96N/C96N Series Updated Jun-19

Lock can be manually operated with a hexagon wrench.
Can be easily mounted onto equipment
Improved ease of maintenance
The lock unit and the cylinder can be separated.
Holding force improved by 15%
Stopping accuracy within ±1 mm
Overall length reduced by 27.5 mm max.

See Catalogs

Air Slide Table
ø12, ø16
MXJ Series Updated Jun-19

Compact, Lightweight 　Height: 18 mm, Width: 34 mm, Weight: 267 g
(MXJ, ø12, 30 mm stroke)
High Precision 　High-precision linear guide Mounted 　Traveling parallelism: 0.005 mm, Mounting parallelism: 0.03 mm
Auto switch and adjuster can be mounted on the same side.
Short pitch mounting is possible.

口碑最好的彩票平台.十大正规彩票安全平台:See Catalogs

Compact Guide Cylinder with Lock
ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100
MLGP-Z Series Dec-18

Stopping possible at any stroke position.
Drop prevention when the pressure is decreased or the residual pressure is released.
Weight reduced by up to 17% with a shorter guide rod and thinner plate
Guide rod: Max. 22 mm shorter (Compared with the existing MLGPM)
Small auto switches or magnetic field-resistant auto switches can be directly mounted on two surfaces.

See Catalogs

Solid State Auto Switch:
Short Type
D-M9□-5 Updated Oct-18

Overall length reduced by 32%(22 mm→15 mm)
Protrusion from the actuator end surface has been reduced.
Specifications are the same as those of the standard product (D-M9m).

See Catalogs

Pin Clamp Cylinder
Compact Type
ø32
C(L)KQG32-X3036 Updated Oct-18

Lightweight: Weight: 41% reduction(900 g→530 g)
Compact
Overall length: 41.5 mm shorter(183 mm→141.5 mm)
Body width: 4 mm shorter(50 mm→46 mm)
Lock mechanism to prevent the dropping of workpieces during emergency stops
Guide pin shapes for workpieces with ø8 to ø20 hole diameters
Easy arm replacement

See Catalogs

Stopper Cylinder
ø16, ø20, ø32, ø40, ø50
RSQ Series Updated Dec-17

Various rod end configurations:10 types
Shape can be selected to suit the intended application.
The new body allows for auto switch mounting on 4 faces.
Mounting brackets are not required. Compact auto switches are mountable.
Lever type rod end selected according to applications
Easy replacement of shock absorbers
Three types of mounting
Rod end tapped, Head end tapped, Through-hole

See Catalogs

Cylinder with Lock/Lock Unit
ø32, ø40, ø50, ø63, ø80, ø100
MWB/MWB-UT Series Updated Oct-17

Bore sizes φ80 and φ100 have been added. [New]
Lock units 80 and 100 have been added. [New]
Lock can be manually operated with a hexagon wrench.
Can be easily mounted onto equipment
Separable construction for improved ease of maintenance
Holding force improved by 15%
High stopping accuracy with in ±1 mm
Overall length reduced by 18 mm max.

口碑最好的彩票平台.十大正规彩票安全平台:See Catalogs

Power Clamp Cylinder
CKZ3T-X2734/-X2568□ Updated Aug-17

Simple switch adjustment greatly reduces work hours
Switch can be adjusted easily when changing the arm opening angle.
With metal switch cassette cover
Weight reduced by up to 39%
High clamping force 4000 N
Spatter proof construction
Select from two types of top cover
A model with a manually operated handle

口碑最好的彩票平台.十大正规彩票安全平台:See Catalogs

Offset Pin Shift Cylinder
ø32, ø40, ø50
CDQ2B-X2839 Updated May-17

With high rigidity offset load capacity
High rigidity, High precision
With plate extended: Deflection of ±0.1 mm or less
3 different port location directions can be selected.
Can be mounted from 2 directions
Coil scrapers equipped as standard
Auto switches are mountable.

See Catalogs

Power Clamp Cylinder/Compact Type
ø25, ø32
CKZT-X2797, X3064/X2798□, X3174□ Updated May-17

Lightweight Weight : 580 g (ø25, Rubber cover)
Compact Width : 34 mm, Height : 192.4 mm (ø25, Arm opening angle: 90°, Rubber cover)
Clamping force : 1100 N (ø32, Arm length : 50 mm, 0.5 MPa pressure)
Force amplification with a toggle mechanism and lock function
Spatter-proof construction
Equipped with a proximity switch that can be used in welding magnetic fields
A model with a manually operated handle is available.
Selectable rubber or metal cover

口碑最好的彩票平台.十大正规彩票安全平台:See Catalogs

NAAMS Standards Compliant Power Clamp Cylinder
CKZ3N-X2742A/X2568□ Updated Apr-17

Weight reduced by up to 38%
Aluminum body with greatly reduced weight
Suitable for robot material handling
Simple switch adjustment greatly reduces work-hours
Switch can be adjusted easily when changing the arm opening angle.
High clamping force: 4000 N
Metal switch cassette cover (Option)
Protects switch cassette from unexpected impact
A model with a manually operated handle is available.

口碑最好的彩票平台.十大正规彩票安全平台:See Catalogs

Air Slide Table
ø6, ø8, ø12, ø16, ø20, ø25
MXQ Series Updated Apr-17

The centralized adjuster of the functional option is available as standard.[New]
Made to order options have been added.[New]
Reduced in height: 10% reduction (27 mm, Existing model: 30 mm)
Product weight: 22% reduction (298 g, Existing model: 380 g)
Allowable kinetic energy: 64% improvement (0.09 J, Existing model: 0.055 J)

See Catalogs

Compact Guide Cylinder
ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63
Series JMGP Updated Feb-17

Bore sizes ø80, ø100 added. [New]
Port thread types NPT, G added. [New]
Compact/Shortened overall length: 30.5mm, Shortened height: 16 mm
Weight up to 69% lighter (0.32 kg → 0.1 kg)
3 mounting options
Top mounting, Bottom mounting, Bottom mounting
Piping is possible in 4 directions.
The solid state auto switch D-M9□ is mountable.
Suitable for pushing, lifting or clamping in a transfer line.

口碑最好的彩票平台.十大正规彩票安全平台:See Catalogs

Rod End
(Piston Rod End Bracket)
Thread size: M4 to M48
KJ□D Series Updated Feb-17

Smooth rotation that can adjust the centering automatically.
Allowable inclination angle: 19°
Can be used in various applications, not limited to connecting to a cylinder.
Can be used as an auxiliary bracket for the oscillating mechanism.
Reduces the design and assembly labor of the oscillating mechanism.

See Catalogs

Compact Cylinder with Linear Guide
MXZ Series
ø12, ø16, ø20, ø25 Updated Feb-17

Compact Overall length: 49.5 mm, Width: 30 mm
Design and assembly time is reduced due to integration of a linear guide to the cylinder.
Lightweight workpieces such as electronic boards can be stopped, positioned and clamped.
Port Location Selectable
Auto Switch Mountable on 3 Surfaces

口碑最好的彩票平台.十大正规彩票安全平台:See Catalogs

ISO Cylinder
C85/C75 Series Updated Jan-17

Compliant with ISO Standards (6432) (C85)
Part numbers for actuators with mounting brackets, rod end brackets,
and auto switches are now available.
As it is no longer necessary to order the bracket and the applicable cylinder
separately, ordering time can be reduced.
Easy fine adjustment of auto switch position
Transparent switch bracket improves visibility of indicator LED.

See Catalogs

口碑最好的彩票平台.十大正规彩票安全平台

New Products

|Actuators