Product Information »
WEB Catalog
» 口碑最好的彩票平台.十大正规彩票安全平台:IO-Link Devices
» Step Motor Controller
Step Motor Controller
Step Motor Controller JXCL1
-
・IO-Link version V1.1
・Process data length 14-byte input/22-byte output
・Transmission speed COM3 (230.4 kbps)
・Minimum cycle time 2.4 ms
・IO-Link port type Class A
・口碑最好的彩票平台.十大正规彩票安全平台:Click here for Applicable electric actuators
▶IO-Link Master
Safety Instructions Electric Actuators/Precautions Features
口碑最好的彩票平台.十大正规彩票安全平台:Series Variations ꦅ口碑最好的彩票平台.十大正规彩票安全平台:Simplifওied Selection Flow Chart Green Procurement (RoHS) 口碑最好的彩票平台.十大正规彩票安全平台:IO-Link Master
口碑最好的彩票平台.十大正规彩票安全平台:Series Variations ꦅ口碑最好的彩票平台.十大正规彩票安全平台:Simplifওied Selection Flow Chart Green Procurement (RoHS) 口碑最好的彩票平台.十大正规彩票安全平台:IO-Link Master
Series | Number of axes | Compatible motor |
---|---|---|
JXCL1 | 1 axis | Step motor (Servo/24 VDC) |
Features
■Two types of operation command
Step no. defined operation: Operate using the preset step data in the controller.
Numerical data defined operation: The actuator ope🍰rates using values su✤ch as position and speed from the PLC.
■Numerical monitoring available
Numerical information, such as the current speed, current position, and alarm codes, can be monitored on the PLC.
■Transition wiring of communication cables
Two communication ports are provided.
* For the DeviceNet™ type, transition wiring is possible using a branch connector.
* 1 to 1 in the case of IO-Link
■IO-Link communication can be performed.
The data storage function eliminates the need for troublesome resetting of step data and parameters when changing over the controller.
●Step data and parameters can be set from the master side.
Step data and parameters can be set or changed by means of IO-Link communication.
●Data storage function
When the controller is changed, the parameters and step data for the actuator are automatically set.*1
●4-wire unshielded cables can be used. *1 The “basic parameter” and the “return to origin parameter” are automatically set as the actuator parameters, and the 3 items of data consisting of No. 0 to 2 are automatically set as the step data.