口碑最好的彩票平台.十大正规彩票安全平台

WEB Catalog
Reduced-wiring Fieldbus System (Serial Transmission System)

Serial Transmission System EX500

SeriesEnclosureCommunication protocol∗Applicable valve
EX500IP67EtherNet/IP™
PROFINET		SY3000，5000，7000 (Plug-in)
VQC1000，2000，4000，5000
SV1000，2000，3000
S0700（IP40）

Features

Gateway decentralized system 2 (128 Points)



Two valve manifolds can be connected to one branch port. SI Unit has a built-in setting switch which switches the number of outputs (32 points / 16 points) of the valve manifold connected to the SI Unit. By setting the number of outputs to 16 points, two valve manifolds can be installed to one branch port.

Web server function

A valve operation test (ON/OFF), a connection diagnostic between the valve manifolds and the input units, and a short-circuit diagnostic of input devices can be performed on a web browser.
ܫA password can be used for the val෴ve operation test (ON/OFF) for security.



No need to set the address

I/O mapping for the SI Unit and Input Unit is set by the Gateway Unit automatically.
The Unit installation order is not specified.
(The upper limit of the inputs / outputs is 32 points for one br🔜anch port.)



Reduced wiring The amount of communication and power supply wiring for the I/O device can be reduced.

Reduction in number of communication nodes By reducing the number of communication nodes, the load on the network is reduced.

Flexibly copes with changes in the protocol Previously, it was necessary to change the part number of the I/O unit, return the I/O unit, and make arrangements once again to obtain a new unit (additional quotation, delivery management).

Now, only the GW unit needs to be changed.

Accessories can be ordered together.

Accessories including cables and connectors can be ordered together to SMC.
Time for selecting parts, order๊ing and mana♓ging lead time can be reduced.



Applicable to output devices other than valve manifold. By using output block, lights and buzzers can be operated.

Specified valve manifold can be controlled by supplying power from a different system. By using a Y branch connector, power from a different system can be supplied to the SI Unit (valve manifold).

System Comparison Table

Applicable Valve Series

Go Top