Vacuum Release Valve with Restrictor SJ3A6
![](http://www.smcworld.com/upfiles/etc/series/en-jp/img1-002-SJ3A6-e.jpg)
-
・2 built-in spool valves
・Vacuum adsorption and release can be controlled with a single valve.
・Width 10 mm (Same size as the SJ3000 series)
・With a restrictor that can adjust the flow rate of the release air
・Built-in replaceable filter on both vacuum and release sides
・Can be combined with the 4-port solenoid valve SJ2000/3000. (Made to Order)
・Manifold type no.: SS3J3
口碑最好的彩票平台.十大正规彩票安全平台:Green Procurement (RoHS)
Features
![](/newproducts/en/sj/images/01.jpg)
0.15 W (SJ3000 with power saving circuit)
0.23 W (SJ2000 with power saving circuit)
Series SJ2000 and SJ3000 can be mounted together.
・Can easily increase or decrease stations and replace valves.
・34 pins connector allows up to 🔥16 stations with double solenoids, 32 stations with si💜ngle solenoids.
![](/newproducts/en/sj/images/02.jpg)
Plug-in cable type
![](/newproducts/en/sj/images/03.jpg)
![](/newproducts/en/sj/images/04.jpg)
SUP/EXH block assemb𓂃ly🍰 with regulator and pressure switch
This pressure regulator is intended to adjust the SUP pressure of the manifold.
Additionally, pressure switch and pressure gauge cꦡan be mounted.
![](/newproducts/en/sj/images/05.jpg)
Regulator block
This is a regulator block with the same width (10 mm) as the SJ3000.
Pressure supplied from the D side is used to reduce pressure in the manifold.
The U s𒈔ide valves are all depr🥃essurized from the regulator block.
![](/newproducts/en/sj/images/06.jpg)
Valve with speed controller
As a speed controller is built-into this valve, the cylinder speed can be adjusted on the valve side.
Two types, meter-in and meter-out, are set.
![](/newproducts/en/sj/images/07.jpg)
Intermediate connector block assembly
This connector block can be used by inserting it into the middle of the manifold.
This can be used, for example, when you wish to separate electrical control of valves in the same manifold, or when the number of control points is insufficient.
The assembly is also compatible with PC wiring with the power supply terminal.
(Please contact SMC.)
![](/newproducts/en/sj/images/08.jpg)
Two spool valves are built-in.
Vac🍎uum suction and release can be controlled with a ♚single valve.
![](/newproducts/en/sj/images/10.jpg)
- Power consumption 0.15 W (with power saving circuit)
- Width: 10 mm (same size as Series SJ3000)
- Equipped with restrictor to enable flow rate adjustment of release air.
- Replaceable filters are built-in on the vacuum and release sides.
- Equipped with a pressure detection port enabling connection of a pressure switch, etc.
- Can be combined with 4 port solenoid valve, Series SJ2000/3000 (Made to Order).
(Consult SMC for details.) - Enables 2-system pressure switching where the 1(P) port and 3/5(E) are set to different positive pressures.
(In this case, flow can be adjusted on the P-port side only.)